 |
| Insaduct for the Beverage Industry | ||||||
|
InsaDuct® is a range of thermally
insulated ducting systems for the beverage industry, factory manufactured under stringent production and quality control conditions. InsaDuct maintains the beverage lines at the optimum temperature ensuring the beverage is at the highest possible quality to the customer. It not only protects the quality of their beverages by maintaining the temperature, but also prevents degradation to plant and equipment caused by condensation. InsaDuct is manufactured from three basic components: pressure tight casing, PVC process pipe and rigid polyurethane foam. |
||||||
| InsaDuct Pre-Insulated Unit Lengths |
"Easy Installation saves time" |
|||||
 |
 |
|||||
|
The PVC inner pipe is socketed one end to join onto another straight length without the need for a coupler. |
||||||
|
The annular space between
pipe and casing is machine
filled with polyurethane foam which expands and, upon setting, forms a totally uniform insulation around the pipe. |
||||||
| InsaDuct kitsets for on-site insulation of fittings | ||||||
|
|
|
|
||||
|
Bend kit A Bend kit is used to insulate the pipe run at 45° or 90° after the service pipe has been installed. A Bend kit comprises of a two part PVC bend insulated with polyurethane foam for easy installation. |
Coupler A coupler is used to joint two lengths of InsaDuct together which do not have a socket on the end. A coupler comprises of a single PVC coupler insulated with polyurethane foam and an outer polyethylene casing. |
Tee kit A tee kit is used to insulate the pipe run where a tee junction is required. A coupler comprises of a two part PVC tee insulated with polyurethane foam for easy installation. |
||||
|
|
||||||
|
© 2003 Insapipe Industries Ltd. All rights reserved. |
||||||
